|
|
PU-97
This equipment is for progressive shutter camera.
|
|
Overview |
|
PU-97 unit not only supplies power source to progressive
shutter camera but also supplies synchronized HD and VD signal to the externally
connected system unit from power source side therefore externally synchronized
operation becomes possible. Also random shutter operation and exposure time control
of camera become possible by inputting external trigger signal (Vinit) into unit
side of this equipment. Additionally video signal can be taken out from the unit
side, therefore remote monitoring and other system configuration become easy. |
Connection diagram |
 |
Specifications |
| Applicable camera |
FC1300, FC800, FC300, FC300M, FC300H, FC300F |
| Trigger input |
BNC terminal and input portion are internally coupled
by 4.7kΩ
TTL level, negative logic, minimum trigger input width = 100 µsec |
| HD/VD input |
After inputting into EXT.HD/VD terminal (BNC) of power
source → input into connected camera by way of camera cable.
(Negative logic and TTL level input) Input impedance is referred to list below. |
| Power output |
DC12V ± 10%, 800mA max |
| Power input voltage |
AC85V to 132V (usually 100V), 50/60Hz |
| Power consumption |
Less than 5W (without camera) |
| Operating temperature range |
0 to 50ºC (Free from due condensation) |
| Outside dimension |
150 (W) × 43 (H) × 130 (D) mm |
| Weight |
650 g |
|
| HD and VD receiving terminal impedance at camera side
are indicated in list. |
Connected camera
|
HD-IN |
VD-IN |
| FC1300 |
210Ω |
210Ω |
| FC800 |
210Ω |
210Ω |
FC300
FC300M
FC300H
FC300F |
210Ω |
210Ω |
|
Dimensional outline drawing |
 |
|
|
