Progressive Shutter Camera
- FC2000
- FC1500
- FC1500F
- FC320/820
- FC320R/820R
- FC300M
- FC300F
- FC1500CL/1500PCL
- FC820CL/320CL
- FC Tool (Serial Communication Control Software)
Progressive Shutter Color Camera
Black and White Video Camera
Color Video Camera
Line Sensor Camera
Power Source Equipment
Monitor
Image Controller & Inspection Equipment

FC300F

	Click here for dimensional outline drawing.
	Click here for connection list for connection with I/F board.

Overview
•	FC300F is white and black progressive scanning progressive shutter video camera used 0.33-million pixel CCD in 1/3-inch optical system.
•	Employing square grid arrays of fault free pixel CCD image pick up devices that perform interline transfer, these cameras are suitable as sensors for high resolution measurements. pattern inspection and character reading.
•	Internal circuits of the cameras perform digital processing with the built-in CPU, enabling personal computers to control them easily through a capture board
•	Waveform correction of video signals is controllable remotely through RS-232C, making it possible to use the cameras under optimum conditions as required by each application.

Features
•	Sensitivity under near infrared region of the spectrum is improved and smear at high speed shuttering is reduced comparing with conventional camera as new designed interline transferring CCD is adopted.
•	Video output can respond to either progressive scanning (non-interlace scanning) output or 2:1 interlace scanning output because field memory is equipped.
•	Static image by electronic shutter is continuously obtained through random resetting by only inputting of external trigger into camera.
•	Video output signal is outputted as analogue and digitized signal. 1. Progressive scanning analogue video signal (BNC) 2. Progressive scanning digital video signal 8 bit, RS-422 output (36-pin connector) (option: RS-644 output)
•	Such changeover operations as setting of electronic shutter speed and shutter mode (usual/random), etc. are all executed at back plane of camera.

Applications		Spectral sensitivity characteristic
•	Barcode reading
•	Various inspection, measuring, and readout of character at high speed on-line processing
•	High definition readout of drawing
•	Sensor for high speed monitoring

Image pick-up device	Progressive scanning, interline transfer CCD
	1/3"size (aspect ratio 4:3)
	0.33 million pixels 659 (H) × 494(V)
Load scanning	fH = 31.47KHz fV = 60 Hz FCLK = 24.55 MHz
External synchronization	External synchronization is possible (Automatic switching) Input HD only during operation on the random shutter mode.
External synchronization	EXT.HD = 31.47 kHz EXT.VD = 60 Hz
Horizontal resolution	More than 450 (TV) lines
Vertical resolution	More than 480 (TV) lines
Sensitivity	100LX F4
Min. luminance on objects	0.5LX F1.4 (without infrared cutoff filter)
S/N	More than 50dB (AGC = OFF)
Video output signal	Non-interlaced: 60 frames/sec.
Video output signal	Digital output: 8 bits RS-422 differential output 100 Ω load Analog output: 1Vpp 75 Ω unbalanced
Gamma	1/0.45 switchable (Analog signal only set at 1 in factory shipment.)
Electronic shutter	Selectable from 1/120000 to 1/30 sec. and to time exposure.
Electronic shutter	1/20000 - 1/30 sec. time exposure
RS232C	possible
Lens mount	C type mount
Power requirement	DC 12V ± 10% Max. 250mA (in analog output only) Max. 400mA (in both analog & digital outputs)
Operating ambient temperature	0ºC to 40ºC (There should be no dew formed nor freezing.)
Storage range	-30ºC to 60ºC (There should be no dew formed nor temperature freezing.)
Impact resistance	70 G
Vibration proof	7G (11 to 200 Hz)
Outside dimensions	46 (W) × 49 (H) × 120 (L) mm (excluding connectors)
Weight	Approx. 300 g

Copyright © Alstron (Singapore) Pte Ltd 2008