Progressive Shutter Camera
Progressive Shutter Color Camera
Black and White Video Camera
Color Video Camera
Line Sensor Camera
Power Source Equipment
Monitor
Image Controller & Inspection Equipment
- GS-610
- VG-4
- OS-20K
- TH-1400
- TH-1400PC
- TP-9854C

TH-1400PC

By equipping personal computer various pinholes are allowed to judge
Pinhole detector

	Click here for dimensional outline drawing.
	Click here for detailed catalogue.

Overview
•	This pinhole detector optically detects pinhole appeared on opaque sheet substance made of such material as aluminum foil, copper foil, copper sheet, and steel sheet using fluorescent lamp and optical fiber in good accuracy.
•	Slight ray of fluorescent lamp light leaked from pinhole of sheet material is passed through optical fiber and detected by high sensitive photomultiplier tube.
•	Pinhole of diameter 20µm can be detected surely.
•	Such type judgment of various pinholes as size, density, continuity, and SK detection are possible.
•	Automatic edge tracing mechanism is equipped in TH-1400PCA type, therefore stabled detection is possible even sheet is snaked.


•	Pinhole of diameter 20µm is surely detected in high speed line of 1,500m/min.
•	Detection sensitivity is not changed even line speed is changed.
•	Variation of detection sensitivity in sheet width direction is very small because pinhole is detected using optical fiber.
•	Dynamic range is very wide, therefore the device can respond to ten times diameter variation.
•	Printing out of pinhole data, saving of the data, and connection with host computer are possible.
•	Database function is equipped.

Dead zone at edge parts
•	Dead zone is 10mm at both edges in small snaking sheet.
•	Apply edge mask automatic tracing mechanism equipped type when snaking is more than ±5mm.

Inspection accuracy / Objected substance
Type	Opaque sheet state substance
Width	500 to 1,380mm
Thickness	Less than 1.2mm
Driving speed	Max 1,500m/min
Vertical vibration	Less than ±1mm
Snaking	Within ±2mm
Ambient temperature	0ºC to +40ºC
Line state	Continuous
Inspection area	Whole area of sheet excluding 10mm dead zone at both edges
Inspection accuracy	More than ø20µm pinhole diameter

Light source
Light projecting method	High frequency lighting method (20KHz - 30KHz)
Light source	White fluorescent lamp
Operation power source	Supplied from inverter
Connection method	Metal plug socket type
Setting distance	Distance from objected substance: 40mm
Operating temperature	0ºC to +40ºC (Free from due condensation)

Receiver
Light receiving method	Optical fiber light collecting method
Photoelectric transducer	Photomultiplier tube
Light receiving width range	Various types
Setting distance	Distance from objected substance: 2mm
Operating temperature	0ºC to +40ºC (Free from due condensation)

Controller
Judgment criteria setting	Setting of slice voltage (Judgment criteria) by digital switch. Setting range is ten times of standard pinhole diameter.
Synchronizing	Customer supplied inspection command (ON period of gA-contacth or gOpen collector signalh becomes inspection period.)
Display	· Power display: LED (amber) · Detection display: LED (red) · Sheet breakage display: LED (orange) · Inspecting display: LED (green) · Display of total turning on time of electricity using hour meter
Output	1. Relay output (A-contact) · Detection output (timer output) ON time: 0.5sec}30% · Detection dis 2. Electronic buzzer alarm (timer output) · Operation time: About 1 sec (with ON and OFF switch)
Operation power source	AC100V±10% 50/60Hz
Power consumption	Approx. 300VA
Connection method	Metal plug socket and terminal block type
Operating temperature	0ºC to +40ºC (Free from due condensation)

Edge mask automatic tracing system
Moving speed	Less than 4mm/sec
Open and close range	400 to 1,400mm
Setting accuracy	Within ±1 mm
Operation panel	Control by sequencer
Operating temperature	0ºC to +40ºC
Outline Dimension (mm)	800 (W) × 700 (H) × 250 (D)

Copyright © Alstron (Singapore) Pte Ltd 2008