Progressive Shutter Camera
Progressive Shutter Color Camera
Black and White Video Camera
- NC 18
- NC 300 A
- NC 241 M Series
- TM 524 NA
- NC 300 AIR
Color Video Camera
Line Sensor Camera
Power Source Equipment
Monitor
Image Controller & Inspection Equipment

NC300A

Click here for dimensional outline drawing.

Overview
•	This EIA method video camera is designed for industrial use, and this camera is small in size, high sensitivity, and high definition.
•	S/N ratio is high and it allows multiple step change over in electronic shutter up to 1/10000 second.
•	External synchronous can be changed for input and output. Accordingly plural cameras can be used directly synchronizing with randomly selected camera.
•	Gain is only manual gain and externally controlled.

Features
•	Camera body is small in size 31(W) × 29 (H) × 65 (D) mm and light in weight.
•	Eight (8) steps from 1/60 to 1/10000 changeover are simply executed externally.
•	Terminal impedance of synchronous signal can be changed over 75Ω and high impedance (10kΩ) respectively.
•	Large power source is not required because this camera requires low consumption power source.
•	Lens is C type mount.

Applications
•	Input equipment of standard image processing device	•	Assembly jig for precision equipment
•	Monitoring of plant and station premises	•	Microscope usage
•	Monitoring of conveyor line	•	Monitoring of slack of sheet material
•	Monitoring of road and traffic density of automobile	•	Monitoring of hazardous place
•	Input equipment for manufacturing inspection at manufacturing plant	•	Monitoring application of instrument

Model
•	NC300A horizontal type and standard camera
•	NC300S horizontal type and clock pulse output camera
•	NC300LA vertical type and standard camera
•	NC300LS vertical and clock pulse output camera
	* Pay attention that pin layout of 12-pin is different between A type and S type.
•	Tripod adaptor Model AT-34 (optional) Use this adopter when camera is mounted using tripod.	•	Camera cable connector (12 pin)

Relation between pin layout and signal of 12 pin connector is as following.
Refer to color of wire when optional camera cable is used.

Pin number	NC300A/LA	NC300S/LS	Wire color
1	GND (0V)	GND (0V)	Vinyl wire (gray)
2	+12V	+12V	Vinyl wire (yellow)
3	GND (0V)	GND (0V)	Coaxial line (red) mesh wire
4	Image output	Image output	Coaxial line (red) core wire (white)
5	GNDi0Vj	GND (0V)	Shield wire (orange) mesh wire
6	NC	HD IN/OUT	Shield wire (orange) core wire (yellow)
7	VD IN/OUT	VD IN/OUT	Shield wire (white) core wire (yellow)
8	GND (0V)	GND (0V)	Coaxial line (black) mesh wire
9	HD IN/OUT	CLOCK OUT	Coaxial line (black) core wire (white)
10	GND (0V)	GND (0V)	Vinyl wire (brown)
11	+12V	+12V	Vinyl wire (blue)
12	GND (0V)	GND (0V)	Shield wire (white) core wire

* Setting of input and output are implemented using changeover switch on base plate.
(Note) Waveform of clock out is 0.7Vp-p.

Image pick-up device	Interline transfer 1/2" size CCD Total pixels: 768 (H) × 494 (V) Pixel size: 8.4 (H) × 9.8 (V) µm
Shutter speed	1/60 second to 1/10000 second valuable
Scan method	Interlaced / Non-interlaced
Synchronizing method	Internal sync. / External sync.
Synchronous frequency	Horizontal: 15.734 kHz / Vertical: 59.9 Hz
Resolution	Horizontal: 570 (TV) lines Vertical: 350 (TV) lines (field), 480 (TV) lines (frame)
S / N	More than 55 dB
Standard illumination intensity	90Lux (F = 4, 3200ºK)
Min. luminance on objects	0.5Lux (F = 1.4, without IR cut filter)
Image signal output	Comp. video signal 1.0 Vp-p/75 Ω
Gamma control	0.45/1 (internal switching)
AGC	OFF
Readout method	field / frame (Internal switching)
Supply voltage	DC12 V ± 10 %
Consumption current	180 mA typ (DC12 V)
Lens mount	C mount
Operating temperature range	-10 ºC to 50 ºC (humidity: less than 70 %)
Storage temperature range	-20 ºC to 60 ºC (humidity: less than 90 %)
Impact resistance	70 G
Vibration proof	7 G (11 to 200Hz)
Outside dimension	31 (W) × 29 (H) × 65 (L) mm
Weight	Approx. 85 g (without lens)

Copyright © Alstron (Singapore) Pte Ltd 2008