|
Trns.,
Rcvr. |
| Detection
length |
Between
Trns. and Rcvr. 250 to1,000mm (Recommended value:
500mm) |
| Detection
range |
 |
| Valid
detection range |
470mm |
| Light
source |
Infrared
LED |
| Light
receiving element |
Silicon
photodiode |
|
Power Supply |
DC24V
(20 to 30V), Ripple 10% Max. (from control cabinet) |
| Current
consumption |
Trns.:
280mA Max., Rcvr.: 210mA Max. |
| Usage
ambient temperature |
-25
to +55ºC (at Water-cooled +80ºC Max.) |
| Storage
temperature range |
-40
to +70ºC (Non condensing) |
| Usage
ambient humidity |
35
to 85%RH (Non condensing) |
| Resistance
to vibration |
10
to 55Hz, Doble oscillation 1.5mm X, Y, Z 3ways
2hours on each |
| Shock
endurance |
490m/s2
X, Y, Z 3ways 3times on each |
| Connection |
Metal
connector cable 2m |
| Protective
construction |
IP66 |
| Weight |
Trns.:
2.6kg (include code 2m)
Rcvr.: 2.9kg (include code 2m)
Air purge unit: 0.3kg
Water-cooled jacket: 1.7kg |
Control
cabinet |
| Control
output |
One-hole
detection outut |
Relay
contact 1C and NPN open collector output (floating) |
| Two-hole
detection outut |
Relay
contact 1C and NPN open collector output (floating) |
| Output
rating |
Relay
contact: AC250V 5A (Resistance load)
NPN open collector output: DC30V 100mA |
| Operating
mode |
One-shot
output 0.1 to 1s variable (Panel side volume) |
| Response
time |
Relay
contact: 30ms Max.
NPN open collector output: 3ms Max. |
| SAFETY |
Output |
Relay
contact 1a |
| Output
rating |
AC250V
5A (Resistance load) |
| Alarm
output (ALARM) |
Operating
mode |
 |
| Output
rating |
Relay
contact AC250V 5A (Resistance load) |
| Rcvr.
check input |
a
contact input (Pin9 - Pin10 operate at short
circuit) |
| Power
Supply |
AC100V
or 110V or 200V or 220V
(Rating voltage -15% +10% 50/60Hz) |
| Power
consumption |
30W
Max. |
| Usage
ambient temperature |
-25
to +55ºC (Non freezing) |
| Storage
temperature range |
-40
to +70ºC (Non condensing) |
| Usage
ambient humidity |
35
to 85%RH (Non condensing) |
| Voltage
endurance / Insulating resistance |
Power
- Case
Relay contact output - Case
Relay contact output - Power
Open collector output - Case
Open collector output - Power |
AC1500V
per minute
at DC500VM 20MO Max.
AC1500V per minute
at DC500VM 20MO Max. |
|
| Resistance
to vibration |
10
to 55Hz, Doble oscillation 1.5mm X, Y, Z 3ways
2hours on each |
| Impact
resistance |
490m/s2
X, Y, Z 3ways 3times on each |
| Connection |
Terminal
block type |
| Protective
construction |
IP40
(with case) |
| Weight |
9kg |
HIGH
POWER SENSOR
Detectable
for one hole or 2 holes
