| TYPE |
Plug-in (2-channel) |
| Model
|
SRB20 |
| Bit Count
|
20bit (10bit x 2) |
| Power Supply
|
100-120V, 200-240VAC ±10% 50/60Hz |
| Power consumption
|
3VA max. |
| Input signal(common to all inputs)
|
Open collector: L level: ON; H level: OFF
Voltage: L level: 0-2 V; H level: 6-30 V
Contact: L level: ON; H level: OFF
|
| Data Output
|
TRIGGER (T) mode: temporarily stored at H -> L (fall)
LEVEL (L) mode: active at L level
Minimum input pulse width: 25 ms
|
| Shift input
|
Shift at H -> L (fall)
Minimum input pulse width: 25 ms
|
| Reset input
|
Reset at L level
Minimum input pulse width: 25 ms
|
| Position of output
|
° Parallel mode
Ch 1 data input Ch 1 output variable between 1-10 bits
Ch 2 data input Ch 2 output variable between 11-20 bits
° Serial mode
Ch 1: data input Ch 1: variable between 1-10 bits
Ch 2: variable between 1-10 bits
|
| Operation Mode
|
ON-OFF operation
|
| Output Mode
|
Relay output 1a, 2 channels
Rating: 1 A (250 VAC) resistance load
|
| Power supply to sensor
|
12V DC 100mA
|
| Power failure compensation
|
Ni-Cd storage battery backup
|
| Power failure compensation time
|
80 hours after supplying power for 8 hours
|
| Connection
|
Terminal block (with M3.5 screws)
|
| Case material
|
Polycarbonate
|
| Mass
|
440g max.
|
| Notes
|
See Panel Description for indicators, switches, etc.
|
Shift register
2-channel (10-bit x 2)
