| Models |
NT30F |
| Detection |
Through
beam |
| Range(Max.) |
30m |
| Object
resolution |
ø22mm
(Min.) Opaque object |
| Power
Supply |
DC
12 - 24V ±10%, Ripple 10% (Max.) |
| Current
consumption |
Trns.:
50mA, Rcvr.: 35mA |
| Output
Mode |
Current
output Rating : Sink Current 100mA (DC30V) Max.
Voltage output Rating : Output impedance 4.7kO |
| Operating
mode |
Light
/ Dark-ON selectable |
| Self-checking
function |
Trns.:
Check signal input (Pin No.4)
Monitor output (Pin No.3) … Normaly ON operation
(Sink Current 100mA (DC30V) Max., Output impedance
4.7kO) |
Rcvr.:
Margin output (iPin No.4) … Glitch ON operation
(NPN open collector, Sink Current 100mA (DC30V)
Max.)
the amount of light received monitor, Earphone
jack tarmminal built-in |
| Response
time |
5ms
(Max.) (NT30FA: 0.5ms) |
| Light
source |
Infrared
LED |
| LED
Indicator Sensitivity |
(Trns)
P.L :
NORM.OP : Power (Red)
Monitor output (Green) |
(Rcvr)
OP.L :
UP : Operation (Red)
Safety margin (Green) |
| Switch |
Light
/ Dark-ON selectable |
| Circuit
protection |
Short
circuit protection built-in |
| Material |
Zinc
dicast |
| Connection |
Terminal
block type (screw: M3.5, width: 8.1mm) |
| Weight |
Trns.:700g,
Rcvr.:700g |
THROUGH
BEAM SENSORS
It
is a strong high-power type in a bad environment.
