|
Output
specification |
| Model |
FT-L101 |
| Light
source |
Infrared
LED |
| Light
monitor |
Output |
Relay
contact output 1C |
| Operation |
 |
| Rating |
AC250V
2A (Resistance load) |
| Model |
FT-R101 |
| Output
mode |
Relay
contact output 1C |
| Rating |
AC250V
2A (Resistance load) |
| Operating
mode |
Light-ON
/ Dark-ON (Switching) |
| Response
time |
20ms
Max. |
General
specification |
|
Range |
Fiber
unit |
Only
fiber unit |
on
FA51/52 |
on
OHC |
GT205AD |
55cm |
2.7m |
22m |
GT21AD |
55cm |
2.7m |
22m |
GT22AD |
50cm |
2.5m |
20m |
GT23AD |
45cm |
2.2m |
18m |
GT25AD |
40cm |
2.0m |
16m |
GT27AD |
35cm |
1.8m |
14m |
GT210AD |
30cm |
1.5m |
12m |
|
Fiber-optic
unit
allowable bending radius |
50mm |
| Power
Supply |
AC100
to 240V, ±10% 50/60Hz |
| Power
consumption |
Trns.
Rcvr.: 2W Max. |
| Indicators |
Tms. |
Power:
Greeen LED, Monitor: Red LED |
| Rcvr |
Power:
Greeen LED, Monitor: Red LED |
| Connection |
Terminal
block type (screw: M3.5, width: 8.1mm) |
| Usage
ambient temperature |
Optical
head, Fiber unit: -25 to +200ºC
Amp. unit: -25 to +55ºC (Non freezing) |
| Storage
temperature range |
-40
to +70ºC (Non condensing) |
| Usage
ambient humidity |
35
to 85%RH (Non condensing) |
| Usage
ambient illuminance |
10,000
lx (incandescent lamp) |
Fiber-optic
unit
allowable bending radius |
IP66 |
|
Resistance to vibration |
10
to 55Hz, Doble oscillation 1.5mm X, Y, Z 3ways
2hours on each |
| Voltage
endurance |
Input/Output
- Case, Input - Output
AC2000V per minute |
| Insulating
resistance |
20MOhms
Max. (at DC500VM) |
| Materials |
Zinc
dicast |
| Weight |
Trns.:720g,
Rcvr.:720g |
FIBER
TYPE HIGH POWER SENSOR
Free
power supply voltage
