Model |
LED
Color sensor-Amplifier unit |
| CS-D3 |
CS-D3PN |
| Detection
method |
Time
sharing spectrum measurement by red/green/blue
LED |
| Dtection
range |
Depending
on fiber unit |
| Detection
spot |
Depending
on fiber unit |
| Power
supply |
12-24V
DC ± 10% Ripple 10% or less |
| Power
consumption |
1.6W
or less |
| Response
time |
Normal
mode (NML):1msec or less
Average value mode (AVE):5msec or less |
| Output |
NPN
open collector |
PNP
open collector |
| Rating |
Sink
current 100mA (30V DC) Max. |
Source
current 100mA (30V DC) Max. |
| External
input |
Non
voltage input Input time:60msec or more |
| Standard
color |
3
colors(selected by Bank changeover switch) |
| Tolerance
range |
9
degrees |
| Discrimination |
COL(Color
element) / C + Y(Color element + Brightness) |
| Teaching |
Auto(AUT)/Manual(MAN)/Mix(Mix)
|
| Timer |
Non(NON)/Off-delay(OFD)
Approx. 50msec |
| Light
source |
Red/Green/Blue
LED |
| Receiving
element |
Photodiode |
| Indicator |
| Power
indicator(RUN): |
 |
Yellow
LED-Lights when poweris supplied Flashes
under teaching |
| Operation
indicator(OP.): |
 |
Orange
LED-Lights when output is issued Flashed
under mix teaching |
| Stability
indicator(STB): |
 |
Green
LED Lights for stable detection Flashes
under auto teaching |
| Error
indicator(ERR): |
 |
Red
LED-Lights for teaching error Flashes
for sensor trouble |
|
| Circuit
protection |
Short
circuit/Reverse connection of power supply protection
built-in |
| Case
Protection |
IP65(with
fiber unit attached) |
| Materials |
Case:
Heat-proof ABS Cover: Polycarbonate |
| Connection |
Lead
wire (Outer dia. φ4.5) 0.2sq×4core 2m length |
| Weight |
100g
or less |
| Operating
Temperature |
-10
~ +55°C (without condensation) |
| Operating
humidity |
35
to 85% RH |
| Vibration
protection |
10
to 55Hz Multiple amplitude 1.5mm XYZ directions/each
2 hours |
| Shock
protection |
500m/S2(approx.50G)
XYZ directions each 3 times |
| Voltage
protection |
AC
1000 V for 1 minute |
| Insulation
resistance |
500V
DC mega 20O or more |