Alstron - Digital Devices (ANP-5D/6D)

Takex Photosensors
Fiber Optic Sensor
DC Power Supply Photo Sensor
Light Curtain Sensors
Background Suppression Photosensors
Ultrasonic Sensors
AC/DC Power Supply Photosensors
Mark Sensors
Color Sensors
Control Unit
Product for Specific Application
Photosensors for Steel and heavy Industries
Digital Devices
- SRB20
- SRS
- SRB-7448
- ANP-5D/6D
- ANP-1F
Downloads

| SRB20 | SRS | SRB-7448 | ANP-5D/6D | ANP-1F |

ANP-5D/6D SERIES Comparator(for analog output sensors)

	Capable of high-accuracy analog control
	High-speed sampling With one-line input, input signals are captured at a sampling frequency of 2,000/sec as close to real time as possible (frequency at 1,000/sec each for two-line input).
	Averaging Averaging feature is selectable between six cycle settings: 1, 10, 30, 50, 100 and 200. One-cycle averaging allows judgment in 0.5 ms, which outputs a signal in response to an instantaneous variation. 200-cycle averaging is suitable for slow and smooth control.
	Analog delay The amplifier frequency characteristic is selectable between high speed (about 1 MHz) and low speed (about 1 kHz).
	Operation For two-line input, addition/subtraction selection is available between “Ch 1 + Ch 2” and “Ch 1 – Ch 2.”

Model	ANP-5D	ANP-6D
Power supply	24V DC ±10% max.
Current consumption	150mA max.
A/D conversion	Successive approximation; 12-bit (4096 division)
Measuring range	0-5/0-10 VDC (selectable with switch)
Resolution	Analog input with 5 V setting: 1.221 mV (calculated value) Analog input with 10 V setting: 2.442 mV (calculated value)
Analog input	1-line input for Ch 1/2-line input; addition or subtraction available
Display format	5-digit: 20.000 V (max.)- -10,000 V (min.)
Display size	7-segment red LED; character size: 8 x 4 mm
Display frequency	20 times/s
Sampling frequency	1-line input: 2,000/s; 2-line input: 1,000/s
Averaging	1/10/30/50/100/200 times (selectable)
No. of outputs	3 (L/M/S)	4(HH/HL/LO/LL)
Rating	NPN open collector output / Rating: sink current 100 mA (30 VDC) max.
Indicator	3 indicators (L: Red / M: Orange / S: Yellow) 4 indicators(HH:RED / HI:Orange/LO: Yellow/ LL: Green)	4 indicators(HH:RED / HI:Orange/LO: Yellow/ LL: Green)
Activation level	Closed or 1.0 VDC or lower
Deactivation level	Open or 2.8 VDC or higher
Response time	Activation: 35 ms max.; deactivation: 70 ms max.
Indicator	Green (front panel)
Reference setting	2 5-digit settings: [1] P/L (large), [2] P/S (small)	4 5-digit settings: [1] HH [2] HI [3] LO [4] LL
Analog delay	Amplifier frequency characteristic: H: high frequency/L: low frequency (selectable with switch)
Case material	Resin
Connection	Terminal block/DIN panel mounting
Mass	350g max

Copyright © Alstron (Singapore) Pte Ltd 2008