 |
| LAMS18 T series is the laser auto marking system
which adopts a semiconductor laser or helium-Ne gas laser as the source
of luminescence, and comes to carry AC servo motor in the source of
a drive. By the input of position data, the laser beam on the bed
arranged at right and left can be moved freely, and can perform high
precision. |
Model |
LAMS18T
-0400-L |
LAMS18T
-1000-L |
LAMS18T
-1200-L |
LAMS18T
-1600-L |
Projection
Distance and Pattern Dimension |
Projection
Distance at 1200mm, Line Length 600mm, Line Width 0.8mm |
Mooving
Range |
Min.40mm~
Max.400mm |
Min.40mm~
Max.1000mm |
Min.40mm~
Max.1200mm |
Min.40mm~
Max.1600mm |
Moving
Speed |
300mm/sec. |
Operating
Method |
Controller |
Drive
System |
Timing
Belt System, AC Servo Motor - 100W
Servo Amp. (Built-in Controllelr) |
Power
Supply |
Laser
Beam - AC100V 50/60Hz
Controller - AC200V 0/60Hz |
|
| 
|
| Model |
LAMS23-400LDSF |
LAMS23-800LDSF |
LAMS23-1000LDSF |
Projection
Distance and Pattern Dimension |
at
1000mm, Line Length 600mm, Line Width approx.0.8mm |
Mooving
Range |
Min.40mm~
Max.400mm |
Min.40mm~
Max.800mm |
Min.40mm~
Max.1000mm |
Mooving
Speed |
100mm/sec(Max.300mm/sec) |
Operating
Method |
Controller |
Stop
Position |
Arbitary
Setup/±0.5mm |
Min.
Setting Unit/Drive System |
0.2mm/pulse,
Timing Belt System, Stepping Motor (two) |
Motor
Supply/Operating Temperature |
DC24V
5A/0°C~50°C |
|
|
