Universal
Input Modules
RZUS-U9, RZMS-U9 |
 |
Features
- Modbus
RTU Network
- External
Trigger Input
- Remote Limit
Alarming
- Data Collection
by PC Recorder Software
|
| Model
RZUS-U9 Bus Powered USB 12-Point Universal Input Module |
5V
(approx. 0.25A) powered through the USB cable
- 12-point
universal inputs indepedently configurable for each channel
- Supports
13 TC types, 12 RTD types, potentiometer and ±12 Vdc inputs
(current input with resistors)
- Easily expandable
via RS-485
Model RZUS-U9
is a high performance 12-point universal input module designed for
remote I/O and data acquisition applications. The Modbus RTU protocol
enables interfacing with the PC Recorder software, MSRPAC-2005.
Model RZUS-U9,
designed to be powered through the USB cable, is ideal for mobile
use with its flexible input capabilities just like the model RZMS-U9.
It conforms to Full Speed USB 2.0, fully hot-swappable by meeting
the standard’s strict inrush current limitation, and applicable
to the PC’s power saving control (low energy consuming ‘Suspend’
mode).
A 500 Vpeak
channel-to-channel isolation plus isolation between external trigger
input, communication ports and alarm contact output is provided.
The RZUS-U9
features superb noise filtering capabilities for 50/60 Hz line.
NMNR ratio to the line frequency and its harmonic contents can be
optimized by setting the rear DIP switch. Each input circuit has
a CR filter of sufficient large time constant so that there will
be little effect of line noise such as 500 mVac superposed on a
thermocouple or ±60 mV input.
The PC Configurator
software RZMSCFG features CJC to individual channels, programmable
first order lag filter, selectable burnout for T/C and RTD input.
Others include Modbus communication parameter, hardware information,
continuous input monitoring, zero and span trimming, leadwire resistance
compensation for RTD input, and etc.
|
| Model
RZMS-U9 for Expanded Network Use |
-
Supports
13 TC types, 12 RTD types, potentiometer
and ±12 Vdc inputs (current input with resistors)
-
500
Vpeak isolation between each analog input, trigger, power and
alarm
-
Includes
both RS-232C and RS-485 communication ports
-
Excellent
noise rejection ratio for stable and accurate
measurement in extreme environments
|
| I/O
Specifications |
| Click
model no. to view spcifications in PDF. |
Universal
Input Isolated 12 Points |
|
|
EXTERNAL
VIEW |
|
|
I/O
Specifications |
DC
voltage: ±60mV, ±125mV, ±250mV, ±500mV,
±1000mV, ±3V, ±6V,
±12V
DC current with shunt resistor
T/C:
K, E, J, T, B, R, S, C, N, U, L, P
RTD: Pt100,
Pt200, Pt300, Pt400, Pt500, Pt1000, Pt50, Ni100, Ni120,
Ni508.4, Ni-Fe604, Cu10
POT: 200O,
500O, 5kO
Trigger input: Dry contact, 1 point
Alarm output: Photo-MOSFET relay, 1 point
|
Capacity |
12
Points |
I/O
ISOLATION |
500
Vpeak between channels, I/O to FG |
INTERFACE |
USB,
RS-485 |
RS-485,
RS-232C |
Power
Input |
USB
power
(high power device) |
100-240
VAC or 24 VDC |
Modbus
interface |
RTU,
analog data in 24-bit floating point, 38.4 kbps |
Mounting |
DIN
rail, wall mount with screws, desk top |
Free
CD |
MSRPAC |
|
|