|
|
Communication
modules (CM)
|
 |
| Model/Item |
Specification |
Dimension |
| FBs-CM22 |
2
RS232 ports (Port3+Port4) with TX, RX
indicators |
Figure
5 |
| FBs-CM55 |
2
RS485 ports (Port3+Port4) with TX, RX
indicators |
| FBs-CM25 |
1
RS232 (Port3) + 1 RS485 (Port4) with
TX, Rx indicators |
| FBs-CM25E |
1
RS232 (Port3) + 1 RS485 (Port4)
with
Ethernet interface and RUN, LINK, TX,
RX indicators |
| FBs-CM55E |
2
RS485 ports (Port3+Port4) with Ethernet
interface and RUN,LINK, TX, RX indicators
|
| FBs-CM25C |
General
purpose optical isolation RS232–RS485
converter, with RX indicators |
| FBs-CM5R |
General
purpose optical isolation RS485 repeater,
with RX indicators |
| FBs-CM5H |
General
purpose optical isolation four ports
RS485 Hub, with ACT, COLLISION indicators |
Figure
4 |
|
| RS232
Specification |
Mechanism |
DB-9F
standard plug |
| Electric |
EIA
RS232 standard specifications |
| RS485
Specification |
Mechanism |
3-pin
European plug-able terminal block |
| Electric |
EIA
RS485 standard specifications with built-in
termination resistor |
| Ethernet
Specification |
Mechanism |
4-pin
European plug-able terminal block |
| Electric |
10BaseT,
IEEE 802.3 standard |
|
|
Communication
boards (CB) |
|
| Model/Item |
Specification |
| FBs-CB2 |
1
RS232 port (Port2), with TX, RX indicators |
| FBs-CB22 |
2
RS232 ports (Port1+Port2), both with
TX, RX indicators |
| FBs-CB5 |
1
RS485 port (Port2), with TX, RX indicators |
| FBs-CB55 |
2
RS485 ports (Port1+Port2), both with
TX, RX indicators |
| FBs-CB25 |
1
RS232 port (Port1) +1 RS485 port (Port2),
both with TX, RX indicators |
| FBs-CBE |
1
Ethernet 10BaseT interface with LINK,
RX and TX indicators |
| RS232
Specification |
Mechanism |
DB-9F
standard plug |
| Electric |
EIA
RS232 standard specifications |
| RS485
Specification |
Mechanism |
3-pin
European plug-able terminal block |
| Electric |
EIA
RS485 standard specifications with built-in
termination resistor |
|
|
|
|
