Progressive Shutter Camera

Progressive Shutter Color Camera

Black and White Video Camera

Color Video Camera

Line Sensor Camera

Power Source Equipment


Image Controller & Inspection Equipment
- GS-610
- PC-10J
- OS-20K
- TH-1400
- TH-1400PC
- TP-9854C


Multifunctional switcher and video switcher that allows connect video camera as many as up to 6 units.

Dimentional outline drawing Click here for dimensional outline drawing.


Video switcher that allows video camera to connect as many as up to 6 units. External power source is not necessary because DC 12V power source is built-in. Channel change is possible without disturbance of image because external synchronized driving is possible for the camera that is connected with internally generated HD/VD timing signal (NTSC interlace and non-interlace).
Also output screen can be selected externally by control input into connector at back panel.
Expanded connection function for plural units is provided to allow as multi channel switcher to connect as many as up to 60 channels by connecting switcher unit up to maximum 10.
  Note- Place limit of unit expanded connection up to 5 units when high fidelity video signal is required for application of image processing.


Changeover application of plural monitoring cameras inside supermarket shop
Changeover application at each floor monitoring camera in department store
Changeover application of car number in parking area
Changeover application of plural monitoring camera in bank
Changeover application of line monitoring in production plant
Other sequential monitoring application using plural cameras by changing them over
Changeover application of double speed camera (option)
Changeover application as external synchronous signal generator, etc.


Video signal input Analogue, 1.0Vp-p, EIA/NTSC composite signal
Input impedance: 75 Ω and Input circuit number: 6CH
Connection method:
1. Connection by our company's standard type 12P round shape connector (female)
2. Connection by BNC connector
Either method is possible.
Video signal output
Analogue, 1.0Vp-p, EIA/NTSC composite signal
Output impedance: 75 Ω and Output circuit number: 2CH (same image output)
Connection method: Connection by BNC connector
External synchronous signal Output to the camera being connected. (6 systems)
HD frequency: 15734.0Hz ± 0.5Hz
VD frequency: 1/262.5 of HD frequency (interlace) or 1/262 (non-interlace)
Each signal of H and L period and phase timing shall be complied with NTSC standard.
Signal level: 5.0Vp-p ± 10% (no load)
2.4Vp-p ± 10% (150 Ω at trailing end)
1.6Vp-p ± 10% (175 Ω at trailing end)
Output circuit: Equivalent to NPN transistorEemitter grounded signal
Output impedance: 160 Ω/H level and 10 Ω/L level
Connection method: Connection by our companyfs standard type 12P round shape connector (female)
Output to external portion of device. (1 system)
Frequency and timing is the same with above
Signal level: H level = 3.7V (min.) to 5.5V (max.)
L level = -0.5V (min.) to 0.5V (max.)
(Each at no load)
Output impedance: 100 Ω (Both H and L)
Maximum current: 6mH/H level and 6mA/ L level
Connection method: connection by 15P high density type D-sub-connector
External synchronous input
Applied to camera selection signal (6CH)
Signal level: H level = 3.7V (min.) to 5.5V (max.)
L level = -0.5V (min.) to 0.5V (max.)
Input impedance: About 10 kΩ (Pull up to 5V at inner.)
Changeover method of channel 1. Changeover by push switch on panel
2. Changeover by automatic scanning operation (interval; 1 sec`120sec))
3. Changeover by external control input
(It is possible to select it by setting.)
Stand by function Signal is outputted while interruption display is executed when sensor function is used. Signal configuration is turned on during interruption is displayed by open collector output.
Rating of stand by signal output transistor
Maximum voltage between collector and emitter … 50V
Maximum current between collector and emitter … 200mA
Permissible collector loss … 500mW
Expansion connection function Expanded connection up to max. 10 units are possible.
With this maximum 60 channels of video signal input can be changed over.
DC power source output 12V ± 5% and maximum 500mA (for 1 unit) can supply for each camera.
Outputted by our companyfs standard type 12P round shape connector
Power supply AC100V ± 10%, 50/60Hz
Power consumption Approx. 10 W (without supply capability for camera) to
Approx. 60 W (at maximum power supply to camera)
Operating ambient temperature 0 ºC to 40 ºC (There should be no dew formed.)
Weight Approx. 2 kg
Dimensional outline 220 (W) × 50 (H) × 250 (D)
home | about us | contact | sitemap 

Copyright © Alstron (Singapore) Pte Ltd 2013