Progressive Shutter Camera

Progressive Shutter Color Camera

Black and White Video Camera
- NC 18
- NC 300 A
- NC 241 M Series
- TM 524 NA
- NC 300 AIR

Color Video Camera

Line Sensor Camera

Power Source Equipment


Image Controller & Inspection Equipment

NC 300 AIR

High sensitivity at near infrared rays
CCD video camera

Dimentional outline drawing Click here for dimensional outline drawing.


This video camera can shoot clear image without using strong LED light source because it has high sensitivity at near infrared rays.
This video camera is suitable to monitor high speed moving object in dark place because S/N ratio of this camera is high and electronic shutter speed can be changed up to 1/10000 second.
External synchronous can be changed for input and output. Accordingly plural cameras can be used directly synchronizing with randomly selected camera.
Gain is only manual gain and externally controlled.


Camera body is small in size 31(W) x 29 (H) x 65 (D) mm and light in weight.
Eight (8) steps from 1/60 to 1/10000 changeover are simply executed externally.
Terminal impedance of synchronous signal can be changed over 75 and high impedance (10k) respectively.
Large power source is not required because this camera requires low consumption power source.
Lens is C type mount.


Wavelength sensitivity characteristic

Monitoring of road and traffic density of automobile
Monitoring of plant and station premises
Monitoring of high speed moving object in dark place
Microscope usage


NC300AIR horizontal type and standard camera
NC300SIR horizontal type and clock pulse output camera
  *Pay attention that pin layout of 12-pin is different between A type and S type.
Tripod adaptor
Model AT-34 (optional)
Use this adopter when camera is mounted using tripod.
Camera cable connector (12 pin)


Relation between pin layout and signal of 12 pin connector is as following.
Refer to color of wire when optional camera cable is used.
Pin number NC300AIR NC300SIR Wire color
1 GND (0V) GND (0V) Vinyl wire (gray)
2 +12V +12V Vinyl wire (yellow)
3 GND (0V) GND (0V) Coaxial line (red) mesh wire
4 Image output Image output Coaxial line (red) core wire (white)
5 GND (0V) GND (0V) Shielded line (orange) mesh wire
6 NC HD IN/OUT Shielded line (orange) core wire (yellow)
7 VD IN/OUT VD IN/OUT Shielded line (white) core wire (yellow)
8 GND (0V) GND (0V) Coaxial line (black) mesh wire
9 HD IN/OUT CLOCK OUT Coaxial line (black)
10 GND (0V) GND (0V) Vinyl wire (blown)
11 +12V +12V Vinyl wire (blue)
12 GND (0V) GND (0V) Shielded line (white) mesh wire
* Setting of input and output are implemented using changeover switch on board.


Image pick-up device Interline transfer 1/2" size CCD
Total pixels: 768 (H) × 494 (V)
Pixel size: 8.4 (H) × 9.8 (V) µm
Shutter speed 1/60 second to 1/10000 second valuable
Scan method Interlaced / Non-interlaced
Synchronizing method Internal sync. / External sync.
Synchronous frequency Horizontal: 15.734 kHz / Vertical: 59.9 Hz
Resolution Horizontal: 570 (TV) lines
Vertical: 350 (TV) lines (field), 480 (TV) lines (frame)
S / N More than 55 dB
Standard illumination intensity 90 Lux (F = 4, 3200ºK)
Min. luminance on objects 0.1 Lux (F = 1.4, without IR cut filter)
Image signal output Comp. video signal 1.0 Vp-p/75 Ω
Gamma control 0.45/1 (internal switching)
Readout method field / frame (Internal switching)
Supply voltage DC12 V ± 10 %
Consumption current 180 mA typ (DC12 V)
Lens mount C type mount
Operating temperature range -10 ºC to 50 ºC (humidity: less than 70 %)
Storage temperature range -20 ºC to 60 ºC (humidity: less than 90 %)
Impact resistance 70 G
Vibration proof 7 G (11 to 200Hz)
Outside dimension 31 (W) × 29 (H) × 65 (L) mm
Weight Approx. 85 g (without lens)
home | about us | contact | sitemap 

Copyright © Alstron (Singapore) Pte Ltd 2013