Progressive Shutter Camera

Progressive Shutter Color Camera

Black and White Video Camera
- NC 18
- NC 300 A
- NC 241 M Series
- TM 524 NA
- NC 300 AIR

Color Video Camera

Line Sensor Camera

Power Source Equipment

Monitor

Image Controller & Inspection Equipment


NC300A

Small size, high definition, EIA method
CCD video camera

Dimentional outline drawing Click here for dimensional outline drawing.
NC300A

Overview

This EIA method video camera is designed for industrial use, and this camera is small in size, high sensitivity, and high definition.
S/N ratio is high and it allows multiple step change over in electronic shutter up to 1/10000 second.
External synchronous can be changed for input and output. Accordingly plural cameras can be used directly synchronizing with randomly selected camera.
Gain is only manual gain and externally controlled.

Features

Camera body is small in size 31(W) × 29 (H) × 65 (D) mm and light in weight.
Eight (8) steps from 1/60 to 1/10000 changeover are simply executed externally.
Terminal impedance of synchronous signal can be changed over 75Ω and high impedance (10kΩ) respectively.
Large power source is not required because this camera requires low consumption power source.
Lens is C type mount.

Applications

Input equipment of standard image processing device Assembly jig for precision equipment
Monitoring of plant and station premises Microscope usage
Monitoring of conveyor line Monitoring of slack of sheet material
Monitoring of road and traffic density of automobile Monitoring of hazardous place
Input equipment for manufacturing inspection at manufacturing plant Monitoring application of instrument

Model

NC300A horizontal type and standard camera
NC300S horizontal type and clock pulse output camera
NC300LA vertical type and standard camera
NC300LS vertical and clock pulse output camera
  * Pay attention that pin layout of 12-pin is different between A type and S type.
Tripod adaptor
Model AT-34 (optional)
Use this adopter when camera is mounted using tripod.
Camera cable connector (12 pin)

Connection

Relation between pin layout and signal of 12 pin connector is as following.
Refer to color of wire when optional camera cable is used.
Pin number NC300A/LA NC300S/LS Wire color
1 GND (0V) GND (0V) Vinyl wire (gray)
2 +12V +12V Vinyl wire (yellow)
3 GND (0V) GND (0V) Coaxial line (red) mesh wire
4 Image output Image output Coaxial line (red) core wire (white)
5 GNDi0Vj GND (0V) Shield wire (orange) mesh wire
6 NC HD IN/OUT Shield wire (orange) core wire (yellow)
7 VD IN/OUT VD IN/OUT Shield wire (white) core wire (yellow)
8 GND (0V) GND (0V) Coaxial line (black) mesh wire
9 HD IN/OUT CLOCK OUT Coaxial line (black) core wire (white)
10 GND (0V) GND (0V) Vinyl wire (brown)
11 +12V +12V Vinyl wire (blue)
12 GND (0V) GND (0V) Shield wire (white) core wire
* Setting of input and output are implemented using changeover switch on base plate.
(Note) Waveform of clock out is 0.7Vp-p.

Specifications

Image pick-up device Interline transfer 1/2" size CCD
Total pixels: 768 (H) × 494 (V)
Pixel size: 8.4 (H) × 9.8 (V) µm
Shutter speed 1/60 second to 1/10000 second valuable
Scan method Interlaced / Non-interlaced
Synchronizing method Internal sync. / External sync.
Synchronous frequency Horizontal: 15.734 kHz / Vertical: 59.9 Hz
Resolution Horizontal: 570 (TV) lines
Vertical: 350 (TV) lines (field), 480 (TV) lines (frame)
S / N More than 55 dB
Standard illumination intensity 90Lux (F = 4, 3200ºK)
Min. luminance on objects 0.5Lux (F = 1.4, without IR cut filter)
Image signal output Comp. video signal 1.0 Vp-p/75 Ω
Gamma control 0.45/1 (internal switching)
AGC OFF
Readout method field / frame (Internal switching)
Supply voltage DC12 V ± 10 %
Consumption current 180 mA typ (DC12 V)
Lens mount C mount
Operating temperature range -10 ºC to 50 ºC (humidity: less than 70 %)
Storage temperature range -20 ºC to 60 ºC (humidity: less than 90 %)
Impact resistance 70 G
Vibration proof 7 G (11 to 200Hz)
Outside dimension 31 (W) × 29 (H) × 65 (L) mm
Weight Approx. 85 g (without lens)
home | about us | contact | sitemap

Copyright © Alstron (Singapore) Pte Ltd 2013