• Specific input within ±300 V; current input with a resistor
• Non-isolated 10-50 mAdc output
• 100, 110, 120, 200, 220, 240 Vac powered

Applications: Interfacing between 10-50 mA and 4-20 mA systems

• Specific input within ±300 V; current input with a resistor
• Isolated 10-50 mA, 0-50 mA, 0-100 mA, 0-200 mA, 0-20 Vdc output
• 100-120 V, 200-240 Vac or 110 Vdc powered

Applications: Retrofitting 10-50 mAdc control system; DC excitation for an electromagnetic coil which demands a high power; Driving actuators used in turbines, speed governors, and vari-axial fan control actuators; Valve positioners/actuators utilized in hydraulic equipment requiring 0-200 mAdc signal conversion from a standard DC signal level

• Specific input within ±300 V; current input with an internal resistor
• Isolated 0-1 Adc output
• 85-264 Vac powered
• 50% zero & span adjustments
• Low heat emission design (12W with maximum load)

Applications: Driving hydraulic machinery; Remote setting for testing equipment

• Emulates the RTD resistance proportional to a DC signal
• 4-20 mA or 1-5 Vdc input
• Pt 100 equivalent resistance output
• 100, 110, 115, 120, 200, 220, 240 Vac or 12, 24, 48 Vdc powered
• Response time 0.5 seconds or less
• Output drive circuit with semiconductor switches ensures long life span
• Fixed output at power failure

Applications: Controlling an RTD input device with a DC signal

• 0-10 V, 0-1 V, 0-5 V, 1-5 Vdc input; current input with a resistor
• 135, 1k, 100, 200, 500, 2k, 5k, 10k, 20k, 50k, 100k ohms output
• 85-132 Vac powered
• Permissible wattage 1W

Applications: Remote setting for inverters; Remote setting for Honeywell’s Modutrol motors; Remote setting for various instruments with potentiometer settings

• Converts position signal from a self-synchronizing motor into a DC signal proportional to the rotating shaft position .
• Input range selectable within 0-360 degrees
• Output selectable within 0-20 mA and +/-10 V.
• 85-132 V or 170-264 Vac powered
• Linearization
• Loop test output

Applications: Position indicator using self-synch for valves and gates; Tank gauge; Sounding level meter

• Selects one signal as output from up to four analog input signals
• Distributes a single input signal to any or all of the up to four output channels
• ±10 Vdc input, minimum span 10mV, 50 mA max.
• 100, 110, 115, 120, 200, 220, 240 Vac or 12, 24, 48 Vdc powered

Applications: Switching 1 – 5V DC signal without worrying about contact failures that happen when using mechanical contacts for this purpose; Switching low-speed pulse signals; Switching alternating signals

• Generates two signals which control two final control elements
• V-shape and parallel output characteristics
• 4-20 mA input
• 12-20 mA and 4-12 mA (inverted with V-shape) outputs
• 100, 110, 115, 120, 200, 220, 240 Vac or 24 Vdc powered

Applications: Balancing two final control elements in opposite actions used in heating-cooling or humidifying-dehumidifying processes

• Generates various patterns of output by front UP-DOWN key programming
• Max. 16-point-segment ramps can be generated
• Output selectable within 0-20 mA and +/-10 V.
• 100-240 Vac, 12-24 Vdc, or 110 Vdc powered
• Loop test output

Applications: Parameters setting for computers and DCS; Signals used in a panel, which are rarely changed.

• BCD, binary, reflected binary, two's complement outputs selectable
• Open collector or CMOS for output levels
• Output can be scaled and displayed in convenient engineering unit
• 100-240 Vac, 12-24 Vdc, or 110 Vdc powered
• Loop test output
• Response time adjustable within 0.15 and 60 sec.

Applications: Interface of analog signal to computers and PLC; Input to a digital panel meter

• BCD, binary, offset binary, two's complement, reflected binary inputs
• Positive or negative logic selectable
• Display can be scaled in convenient engineering unit
• 100-240 Vac, 12-24 Vdc, or 110 Vdc powered

Applications: Interface of analog signal for computers and PLC