|
Single
point telemetering |
|
Ethernet --
you still need to specify the protocol |
|
Using
the R1M in conjuntion with Citect 5 -- remote I/O SCADA/HMI software
package |
| |
R1M Application |
|
We are using
R1M-J3 (I/O Module for RTD input) to monitor temperature.
Is there any way to set the PC Recorder store data only when input
is between a specified temperature ranges? |
|
This
is an application for a twin tower hotel. There are about 100
guest rooms and the hotel wants to monitor the water flow of each
guest room. Flow meter will be used to sense the water flow, from
which voltage pulse will be generated. How can we configure a
monitoring system for the customer? |
|
We have an
application similar to the one on previous issue. This one is a
hotel with larger scale. They have 800 guest rooms and want to monitor
the water flow from flowmeter at each room. Is M-System PC recorder
capable in handling this? |
|
We
monitor indoor temperature of clean medical safekeeping room.
We put in temperature-measuring devices at several places and
measure the temperature of the room. Even if one of the temperature-measuring
device rise in temperature than rated value, we want to give an
alarm as output.
Also, we want to monitor temperature changes on PC at control
room. Does M-System have suitable unit for this application. |
|
PC RECORDER
APPLICATIONS – Part 1
Total Pollutant Load Control for Industrial Wastewater |
|
PC RECORDER
APPLICATIONS – Part 2
Tap Water Supply Leakage Alarm |
