|
What
are major characteristics of model M2PP? |
|
I want to indicate
an integrated flow value by 4-20mA dc analog signal output by a
2-wire electromagnetic flowmeter. |
| |
I
need to indicate flow pulse signals (10,000 pulses/hour) at two
independent integrating counters. Maximum input to each counter
is 500 pulses/hour. |
|
Model JPA Application |
|
A
positive displacement flowmeter is used to measure the flow of a
variety of different viscosity liquids. The flow rates range from
0-5 gpm to 0-50 gpm. The flow rates relate to a DC pulse frequency
from a proximity sensor of 0-1.2 Hz to 0-12.0 Hz. I need one frequency
to analog transmitter that will provide a 4-20 mA DC signal under
both conditions and for any other frequency range which may occur
in this application. |
| |
Will the model
MTD work according to the following specs?…. |
| |
What is "cutout"
function of new frequency transmitters? Is it not "low-end
cutout"? |
| |
In the factory
we are using the flow meter that outputs the pulse signal. With
this signal we want to know an instantaneous flow. Which M-System
products do you suggest for this application? |
|
We are from
an institute of a pharmacy company.
We are thinking of using a math converter to count the pulse signal
from a flow meter so as to measure flow volume. The flow meter sends
out 1 pulse every 0.333 ml. Now we want to apply a signal conditioner
to the flow meter so that it can generate a pulse every 1 ml for
the math converter to count. Is there any kind of signal conditioner
that can be used for this by purpose? |
