Fatek

Main Features

Application

Model Specification
- Digital
- Analog
- Communication
- General

Download
Power supply for expansion modules
     
Power input
Residual capacity of output power
5VDC (Logiccircuit)
24VDC (Inputcircuit)
24VDC (outputcircuit)
FBs-EPOW
100 ~ 240VAC -15%/+10%, 21W
400mA
250mA
250mA
FBs-EPOW-D
24VDC -15%/+20%,12W
400mA
400mA*
250mA
Thumbwheel switch input module
Input method
Occupied IR number
Refresh time for input
 
FBs-32DGI
16-bit (4 digits) X 8 multiplexing input scan
8 words (32 digits/128 individual points)
10mS max. (IO ASIC)
 
7/16-segment LED display modules
FB-7SG1
FB-7SG2
Decoding display
4 bits to represent a character. It can display 16 kinds of pre-decoded character including 0 ~ 9, -, H, E, c, t and all blank
Non-decoding display
Each segment controlled by 1 individual bit
Display number of character or points of LED
8 (4*) characters or 64 points individual LED
16 (8*) characters or 128 points individual LED
Refresh time for display
10mS max. (IO ASIC)
Driving current
40mA / segment
Display method
1 ~ 8 characters multiplexing display
Driving voltage Low voltage
5VDC (can be 10% up)
High voltage
7.5V, 10V, 12.5V selectable (can be 10% up)
Fine tune of voltage drop
0.6V, 1.2V, 1.8V selectable
Over voltage driving indication
Each channel has individual over voltage (O.V) driving LED indication
Wiring method
16 pins flat cable, 2.54mm header connector
Isolation method
Photocouple isolation
Power input
24VDC - 15%/+20%, static consumption is 2VA max, dynamic current is increased according to display
Dimensions
Figure 4
FB-DAP simple human-machine interfaces
FB-DAP-B(R)
FB-DAP-C(R)
Display 16-character x 2, 5x7dot matrix LCD display, with LED backlighting
Key pads 20 (4x5) membrane
Power input
24V,41mA(48mA)
5V, 100mA (120mA)
Communication interface Electric
RS485
RS232
Mechanism 3 pins European detachable terminal block D-sub 9 pins male connector
Number of linked station Max. 16 stations
1
General features Timer, counter, register, relay, access of contact in PlC
Special features Alarm, information display, user definable special quick keys
Card reading feature Available only in BF/-CR models, with maximum distance of 12 ~ 18 cm
Card writing feature Read/Write-able CARD-2 card, specified models(-BW/-CW) only
Dimensions
Figure 7
RFID cards
CARD-1
CARD-2
Memory
64-bit + CRC error detecting codes
Working temperature
-25°C ~ 50°C (ISO 7810)
Writing times
Read-only
At least 10000 times
Dimensions (mm)
86x54x1.3
Weight (g)
12
Memory pack
Item
Specification
Memory 1M bits FLASH ROM
Memory capacity 20K words program + 20K works data
Write protection DIP switch ON/OFF protection
home | about us | contact | sitemap 

Copyright © Alstron (Singapore) Pte Ltd 2013